The SFP-HHDVR1-0000-M is an electrical SFP receiver module designed to convert HDMI/DVI (High definition multimedia
interface®) to an SDI signal output without scaling artifacts. The SFP-HHDVR1-0000-L enforces HDCP, therefore the unit will not pass protected content. Up to 8 channel of audio is supported and de-embedded from the HDMI signal.
The SFP-HHDVR1-0000-M provides module identification information, configuration and diagnostic monitoring through a 2 wire serial interface. It is also a hotpluggable solution for field system upgrade and maintenance.
The SFP-HHDVR1-0000-M is interchangeable with other MSA optical video SFP, coaxial SFP and SFP converter improving product flexibility. Ganged cages, belly-to-belly and superposed cages mounting are supported. The module provides reduced development risk and cost.
The SFP-HHDVR1-0000-M is Pb-free and ROHS compliant.
- SMPTE 424M, 292M and 259M compliant
- Supported format:
- 25/625,
- 720p/1080i (50/59.94/60Hz),
- 1080p (23.98/24/15/29.97/30/50/59.94/60Hz)
- HDMI/DVI Input:
- 24 bit (3x8 bits)
- RGB 4:4:4, YCbCr 4:2:2, YCbCr 4:4:4
- BW = 150Mhz
- RGB Range (Full/SMPTE)
- Up to 8 channel audio de-embedding (PCM)
- HDMI 1.4 Type D connector
- HDMI Type D plug with retention
- HDCP supported
- Control via serial interface including:
- Voltage & Temperature Monitoring
- HDMI/DVI interface configuration
- EDID reading, Audio mapping
- Module Information
- Low Power Consumption Single Supply +3.3V
- 58.5mm x 13.4mm x 8.6mm SFPPackage
- Operating temperature: 0°C to 70°C
| SFP-HHDVR1-0000-M | HDMI 1.4 HD Video Receiver SFP |
